How long will a 1000Wh power station run a Power Drill?

A 1000Wh power station runs a power drill (about 600W) for roughly 1.4 h, after accounting for typical inverter and battery losses (~85% usable).

How long will a 2000Wh power station run a Power Drill?

A 2000Wh power station runs a power drill (about 600W) for roughly 2.8 h, after accounting for typical inverter and battery losses (~85% usable).

How is Power Drill runtime calculated?

Runtime = usable battery energy ÷ power draw. Usable energy is about 85% of the rated capacity after depth-of-discharge and inverter losses. A Power Drill draws about 600W.

How long will a portable power station run a Power Drill?

A Power Drill draws about 600W. The table below shows how long common power station sizes will run it, after accounting for real-world inverter and battery losses (about 85% of rated capacity is usable).

Power Station	Continuous
300 Wh	0.4 h
500 Wh	0.7 h
1,000 Wh	1.4 h
1,500 Wh	2.1 h
2,000 Wh	2.8 h
3,000 Wh	4.3 h
5,000 Wh	7.1 h

Estimates use ~85% usable capacity (depth of discharge + inverter losses). Actual runtime varies with temperature, load variation, and device efficiency.

Power stations that fit a Power Drill

GRECELL T1000

1,024Wh · 1,000W AC · $399

Check Price →

FlashFish UA550

520Wh · 600W AC · $229

Check Price →

TALLPOWER V600

600Wh · 600W AC · $269

Check Price →

Running more than just a Power Drill?

Add all your devices and get exact battery, solar, and inverter specs.

Open the Calculator Power System Calculator →